ATDD 2000 - Drafting and Design for the Trades II

Credit Hours: 2.00

Objectives: 

1. Determine proper lines, dimension types, arrowheads, and symbols used in detailed drawings.
2. Use dimensioning rules for placement, spacing, readability, and over/under dimensioned parts.
3. Create required annotations such as notes, title blocks, manufacturing specifications, and basic tolerances.

Outcome 2: Upon completion of this course, students will be able to draw sectional views.

Objectives: 

1. Create full, half, and offset sections of a part.
2. Generate aligned, removed, and revolved sections of a part.
3. Draw rib, web, and thin sections, as necessary.
4. Add proper cross-hatching based on part material.

Outcome 3: Upon completion of this course, students will be able to apply advanced orthographic drawing techniques.

Objectives:

1. Create removed and revolved orthographic views.
2. Draw detailed and partial views of a part feature.
3. Develop auxiliary views of an inclined or oblique surface.
4. Properly annotate and indicate cast, molded, and welded parts.

Outcome 4: Upon completion of this course, students will be able to produce assembly drawings with all necessary manufacturing information.

Objectives: 

1. Use detailed drawings to create an assembly drawing packet.
2. Generate a bill of materials.
3. Add necessary sectional views.
4. Create annotations such as dimensions, notes, revision columns, title blocks, and balloons.

• Communication: The graduate can communicate effectively for the intended purpose and audience.
• Critical Thinking: The graduate can make informed decisions after analyzing information or evidence related to the issue.
• Global Literacy: The graduate can analyze human behavior or experiences through cultural, social, political, or economic perspectives.
• Information Literacy: The graduate can responsibly use information gathered from a variety of formats in order to complete a task.
• Quantitative Reasoning: The graduate can apply quantitative methods or evidence to solve problems or make judgments.
• Scientific Literacy: The graduate can produce or interpret scientific information presented in a variety of formats.

1. Dimension Appearance
2. Dimensioning Rules
3. Drawing Annotation: Specifications, Notes, Basic GD&T
4. Quiz #1 - Detailed Drawings
5. Sectional View Creation and Rules
6. Basic Sectional Views: Full, Half, Offset
7. Advanced Sectional Views: Aligned, Revolved, Rib, Web
8. Quiz #2 - Sectioning
9. Advanced Views: Removed, Revolved, Detail, Partial
10. Auxiliary Views
11. Cast, Molded, and Welded Parts
12. Quiz #3 - Advanced Drawing Techniques
13. Components of an Assembly Drawing
14. Bill of Materials, Part Identification
15. Assembly Drawing Annotation, Dimensions, Line Coding
16. Quiz #4 - Assembly Drawings