ATAP 2310 - CNC Mill G & M Programming & CNC Machining Credit Hours: 2.00 Prerequisites: None
This course teaches the general concepts of CNC Mill Programming. Through lecture and lab assignments, the student will learn offline programming, shop floor programming, and the principles of 2-1/2 axis CNC milling. Profiling, facing, drilling, reaming, tapping, threading and pocketing cycles will be emphasized, accompanied by demonstrations, student programming, and hands-on setup and machine operation.
Billable Contact Hours: 2
Search for Sections Transfer Possibilities Michigan Transfer Network (MiTransfer) - Utilize this website to easily search how your credits transfer to colleges and universities. OUTCOMES AND OBJECTIVES Outcome 1: Upon completion of this course, students will be able to program and debug two-dimensional CNC mill toolpath operations using Fanuc compatible G&M code programming language.Objectives: - Program drilling operations.
- Program rough and finish profile operations.
- Utilize absolute and incremental style programming.
- Program subroutines and subprograms.
Outcome 2: Upon completion of this course, students will be able to program tool offsets. Objectives: - Define tool length offsets.
- Define cutter diameter compensation.
Outcome 3: Upon completion of this course, students will be able to verify toolpath programs prior to machining. Objectives: - Simulate programs on the machine controller.
- Simulate programs using stand-alone simulators.
Outcome 4: Upon completion of this course, students will be able to operate CNC milling machine tools. Objectives: - Upload CNC programs.
- Setup tool length and cutter diameter compensation offsets.
- Setup fixture offsets.
- Run programs.
- Edit, debug, and rerun programs.
COMMON DEGREE OUTCOMES (CDO)
- Communication: The graduate can communicate effectively for the intended purpose and audience.
- Critical Thinking: The graduate can make informed decisions after analyzing information or evidence related to the issue.
- Global Literacy: The graduate can analyze human behavior or experiences through cultural, social, political, or economic perspectives.
- Information Literacy: The graduate can responsibly use information gathered from a variety of formats in order to complete a task.
- Quantitative Reasoning: The graduate can apply quantitative methods or evidence to solve problems or make judgments.
- Scientific Literacy: The graduate can produce or interpret scientific information presented in a variety of formats.
CDO marked YES apply to this course: Communication: YES Critical Thinking: YES Global Literacy: YES Information Literacy: YES Quantitative Reasoning: YES Scientific Literacy: YES
COURSE CONTENT OUTLINE - CNC Mill Control Units
- Discuss the following topics
- Memory Management
- Program Management
- Applied Operation of the following topics:
- Editing
- Program Saving
- Program Deletion
- Program Run
- Tool Offsetting
- Uploading Procedures
- Downloading Procedures
- CNC Mill Programming
- The Cartesian coordinate system
- As used to relate the Machine to the Part
- As used to relate the Cutting Tool to the Part generated by the program
- Manual Programming
- M & G Code Formats using ISO Programming
- Incremental Positioning
- Absolute Positioning
- Specific Control Formats
- Cutting Tool Compensation
- Advance Techniques
- Sub-programs
- Coordinate system rotation
- Mirroring
- Datum offsets
- Multiple Part Programming
- Incremental repeat programming
- CNC Mill Operation
- Mill Start up and Grid Procedures
- Program Run Procedures
- Basic Mill Set-Up Procedures
- Tool Changing Procedures
- Setting Tool Length Offsets
Primary Faculty Walters, Gary Secondary Faculty Associate Dean Jewett, Mark Dean Hutchison, Donald
Primary Syllabus - Macomb Community College, 14500 E 12 Mile Road, Warren, MI 48088
Add to Favorites (opens a new window)
|