Dec 21, 2024  
Official Course Syllabi 2019-2020 
    
Catalog Navigation
  Catalog Home
  Course Syllabi
  My Favorites
HELP
Official Course Syllabi 2019-2020 [ARCHIVED CATALOG]

Add to Favorites (opens a new window)

ATQT 1000 - Quality Inspection Fundamentals

Credit Hours: 2.00

Prerequisites: None

This course is an introductory class for the quality professional. The course covers the proper use of dimensional inspection equipment such as scales, verniers, calipers, micrometers, miscellaneous hand tools, and gage blocks, in inch and metric scales, as well as blueprint readings skills sufficient to apply the measurement tools and techniques. The course covers nomenclature, instruments, the interpretation of engineering drawings, and measurement methods in a format that is approximately 50% hands-on, Math skills and the use of a scientific calculator are recommended, but not a prerequisite. This course is good preparation for a midlevel job position in the quality assurance field when combined with ATQT 1010 and provides an excellent knowledge base to prepare the student for the American Society for Quality (ASQ) Certified Mechanical Inspector Test.

Contact Hours: 2

South Campus

OUTCOMES AND OBJECTIVES
Outcome 1: Upon successful completion of this course, the student will be able to demonstrate the skills and knowledge necessary in an entry‐level quality assurance / dimensional inspection position.

Objectives: Upon successful completion of this course, the student will be able to:

  1. Describe dimensions in both English and metric units.
  2. Measure parts accurately in both inch and metric scales.
  3. Choose the correct tool to properly measure any dimensions and/or tolerance.

Outcome 2: Upon successful completion of this course, the student will be able to measure a drawing dimension accurately, with precision and without bias.

Objectives: Upon successful completion of this course, the student will be able to:

  1. Interpret blueprint requirements and measure them competently.
  2. Evaluate pass/fail for the measured dimension.
  3. Measure parts accurately with both inch and metric scales.
  4. Measure parts accurately with both inch and metric calipers (vernier, dial, and digital)
  5. Measure parts accurately with both inch and metric micrometers.
  6. Measure parts accurately with either inch or metric depth micrometers.
  7. Create gage block stacks in both inch and metric.

Outcome 3: Upon successful completion of this course, the student will be able to write and communicate dimensional inspection results in a competent technical manner.

Objectives:

  1. Describe dimensions in both inch and metric terms,
  2. Explain communication using industry nomenclature in both inch and metric.
  3. Interpret communication using industry nomenclature in both inch and metric.

Outcome 4: Upon successful completion of this course, the student will be prepared for the applicable requirements of the ASQ Certified Mechanical Inspector test.

Objectives:

  1. Interpret part drawing requirements and measure them accurately.
  2. Evaluate pass/fail for the measured dimension.
  3. Describe dimensions in both inch and metric terms.
  4. Choose the correct tool to measure any dimension and/or tolerance.
  5. Document measurement results per standard industry practices.
COMMON DEGREE OUTCOMES
(Bulleted outcomes apply to the course)

  • 1. The graduate can integrate the knowledge and technological skills necessary to be a successful learner.
  • 2. The graduate can demonstrate how to think competently.
  • 3. The graduate can demonstrate how to employ mathematical knowledge.
  • 4. The graduate can demonstrate how to communicate competently.
  • 5. The graduate is sensitive to issues relating to a diverse, global society.
COURSE CONTENT OUTLINE
  1. Course Introduction
    • Blueprint Reading
      • Title Block / change Level
      • Views
      • Dimensions
      • Tolerances
      • Skills Assessment
  2. Introduction to Measurement and Metrology
    • Uses of measurement
    • Communicating Measurements
    • Codification of Measurements
  3. Languages and Systems of Measurement
    • Relative measurements / how big or how small?
    • Accuracy vs. Precision
    • Evolution of Measurement Standards
  4. Languages and Systems of Measurement continued
    • Decimal Inch System
    • Metric System
    • Communications consideration
    • Rounding off numerical values
  5. Measurement and Tolerances
    • The meaning of and need for tolerances
    • Geometric Dimensioning and Tolerancing
    • Quiz #1
  6. Statistics and Metrology
    • Basic Statistics
    • Probability
    • Acceptance Sampling
  7. Measurement with Graduated Scales and Scaled Instruments
    • The Steel Rule
    • The Role of error
    • Scaled Instruments
  8. Measurement with Graduated Scales and Scaled Instruments continued
    • Three elements of Measurement
    • Introduction to calipers
    • Transfer Measuring devices
  9. Vernier Instruments
    • Caliper
    • Depth Gage
    • Height Gage
    • Quiz #2
  10. Calipers
    • Vernier
    • Dial
    • Digital
    • Inside, outside, and depth measurements
    • Quiz #3 on Calipers
  11. Micrometer Instruments
    • Introduction
    • Using a micrometer.
    • Care of a micrometer
  12. Micrometer Instruments continued
    • Depth micrometers
    • Quiz #4 on micrometers
  13. Gage Blocks
    • Development of Gage Blocks
    • Modern Gage Blocks
    • Calibration of Gage Blocks
    • CP and Cpk Calculation and analysis
  14. Gage Blocks continued
    • Combining Gage Blocks
    • Gage Block stacks
    • Gage Block applications
    • Quiz #5 covering Gage Blocks
  15. Class Review and Evaluation
    • Reporting Dimensional Inspection Results
  16. Final Exam
Primary Faculty
Walters, Gary
Secondary Faculty

Associate Dean
Pawlowski, Timothy
Dean
Hutchison, Donald

Official Course Syllabus - Macomb Community College, 14500 E 12 Mile Road, Warren, MI 48088


Add to Favorites (opens a new window)