Nov 23, 2024  
Official Course Syllabi 2018-2019 
    
Catalog Navigation
  Catalog Home
  Course Syllabi
  My Favorites
HELP
Official Course Syllabi 2018-2019 [ARCHIVED CATALOG]

Add to Favorites (opens a new window)

ATAP 2320 - CNC Lathe G & M Programming & CNC Machining

Credit Hours: 2.00
(2 contact hrs)
This course teaches the general concepts of CNC Lathe Programming and Machining. Through lecture and lab assignments, the student will learn offline programming, shop floor programming, and the principles of 2 axis CNC turning. Turning, facing, drilling, reaming, tapping, and threading will be emphasized, accompanied by demonstrations, student programming, and hands-on setup and machine operation. South Campus.

Prerequisites:
None
OUTCOMES AND OBJECTIVES
Outcome 1: Upon completion of this course, students will be able to program and debug CNC lathe toolpath operations using Fanuc compatible G&M code programming language.

Objectives:

  1. Program rough and finish facing operations.
  2. Program rough and finish OD profile operations.
  3. Program OD threading operations.
  4. Utilize absolute and incremental style programming.
  5. Program subroutines and subprograms.

Outcome 2: Upon completion of this course, students will be able to program tool offsets.

Objectives:

  1. Define tool length offsets.
  2. Define cutter diameter compensation.

Outcome 3: Upon completion of this course, students will be able to verify toolpath programs prior to machining.

Objectives:

  1. Simulate programs on the machine controller.
  2. Simulate programs using stand-alone simulators.

Outcome 4: Upon completion of this course, students will be able to operate CNC milling machine tools.

Objectives:

  1. Upload CNC programs.
  2. Setup tool length and cutter diameter compensation offsets.
  3. Setup fixture offsets.
  4. Run programs.
  5. Edit, debug, and rerun programs
COMMON DEGREE OUTCOMES
(Bulleted outcomes apply to the course)

  • 1. The graduate can integrate the knowledge and technological skills necessary to be a successful learner.
  1. The graduate can demonstrate how to think competently.
  • 3. The graduate can demonstrate how to employ mathematical knowledge.
  1. The graduate can demonstrate how to communicate competently.
  1. The graduate is sensitive to issues relating to a diverse, global society.
COURSE CONTENT OUTLINE
  1. CNC Lathe Control Units
    1. Discuss the following topics
      1. Memory Management
      2. Program Management
  2. Applied Operation of the following topics
    1. Editing
    2. Program Saving
    3. Program Deletion
    4. Program Run
    5. Tool Offsetting
    6. Uploading Procedures
    7. Downloading Procedures
  3. CNC Lathe Programming
    1. The Cartesian coordinate system
      1. As used to relate the Machine to the Part
      2. As used to relate the Cutting Tool to the Part generated by the program
    2. Manual Programming
      1. M & G Code Formats using ISO Programming
      2. Incremental Positioning
      3. Absolute Positioning
      4. Specific Control Formats
      5. Cutting Tool Compensation
    3. Advance Techniques
      1. Sub-programs
      2. Datum offsets
      3. Incremental repeat programming
  4. CNC Lathe Operation
    1. Lathe Start up and Grid Procedures
    2. Program Run Procedures
    3. Basic Lathe Set-Up Procedures
    4. Tool Changing Procedures
    5. Setting Tool Length Offsets
Primary Faculty
Walters, Gary
Secondary Faculty

Associate Dean
Pawlowski, Timothy

Official Course Syllabus - Macomb Community College, 14500 E 12 Mile Road, Warren, MI 48088


Add to Favorites (opens a new window)