ELEC 1161 - Electronic Technology 1

Credit Hours: 3.00

Outcome 2: Upon completion of this course, students will be able to solve for all unknown values given 5 different series circuits. Ohm’s, Watt’s and Kirchhoff’s voltage laws will be developed.

Outcome 3: Upon completion of this course, students will be able to develop a parallel circuit using Electronic Workbench.

Outcome 4: Upon completion of this course, students will be able to solve for all unknown values given 5 different parallel circuits. Ohm’s, Watt’s and Kirchhoff’s current laws will be used.

Outcome 5: Upon completion of this course, students will be able to solve for all unknown values given 5 different series-parallel circuits. Ohm’s, Watt’s and Kirchhoff’s current and voltage laws will be used.

Objectives:

1. Components, Quantities and Units
   1. Recognize common electrical components and measuring instruments
   2. State basic electrical and magnetic quantities and units
   3. Use scientific notation to express quantities
   4. Use engineering notation and metric prefixes to express large and small quantities
   5. Convert from one metric prefixed unit to another
2. Voltage, Current and Resistance
   1. Describe the basic structure of the atom
   2. Explain the concept of electrical charge
   3. Define voltage, current and resistance and explain their characteristics
   4. Describe a basic electrical circuit
   5. Make basic circuit measurements
   6. Recognize electrical hazards and practice proper safety procedures
3. Ohm’s law, energy and power
   1. Explain Ohm’s law
   2. Use Ohm’s law to determine voltage, current, or resistance
   3. Define energy and power
   4. Calculate power in an electronic circuit
   5. Properly select resistors based on power rating
   6. Explain energy conversion and voltage drops
   7. Discuss power supplies and their characteristics
   8. Describe a basic approach to troubleshooting
4. Series circuits
   1. Identify a series circuit
   2. Determine the current in a series circuit
   3. Determine total series resistance
   4. Apply ohm’s law to series circuits
   5. Determine the total effect of voltage sources in series
   6. Apply Kirchhoff’s voltage law
   7. Use a series circuit as a voltage divider
   8. Determine power in a series circuit
   9. Determine and identify ground in a series circuit
   10. Measure voltages relative to circuit ground
   11. Troubleshoot series circuits
5. Parallel circuits
   1. Identify a parallel circuit
   2. Determine the voltage across each parallel branch
   3. Apply Kirchhoff’s current law
   4. Determine total parallel equivalent resistance
   5. Apply ohm’s law in a parallel circuit
   6. Use a parallel circuit as a current divider
   7. Determine power in a parallel circuit
   8. Troubleshoot parallel circuits
6. Series-Parallel circuits
   1. Identify series-parallel relationships
   2. Analyze series-parallel circuits
   3. Analyze loaded voltage dividers
   4. Determine the loading effect of a voltmeter on a circuit
   5. Analyze a Wheatstone bridge circuit
   6. Apply superposition theorem to circuit analysis
   7. Troubleshoot series-parallel circuits

1. Components, Quantities and Units
   1. Electrical components and measuring instruments
   2. Electrical and magnetic units
   3. Scientific notation
   4. Engineering notation and metric prefixes
   5. Metric unit conversions
2. Voltage, Current and Resistance
   1. Atomic structure
   2. Electrical charge
   3. Voltage, current, and resistance
   4. Basic circuit measurements
   5. Electrical safety
3. Ohm’s law, energy and power
   1. Ohm’s law
   2. Application of Ohm’s law
   3. Energy and power
   4. Power in electronic circuits
   5. The power rating of resistors
   6. Energy conversion and voltage drops across a resistor
   7. Power supplies
   8. Introduction to troubleshooting
4. Series circuits
   1. Resistors in series
   2. Current in a series circuit
   3. Total series resistance
   4. Ohm’s law applied to series circuits
   5. Voltage sources in series
   6. Kirchhoff’s voltage law
   7. Voltage dividers
   8. Power in a series circuit
   9. Circuit ground
   10. Troubleshooting series circuits
5. Parallel circuits
   1. Resistance and voltage in parallel circuits
   2. Kirchhoff’s current law
   3. Total parallel equivalent resistance
   4. Ohm’s law applied to parallel circuits
   5. Current dividers
   6. Power in parallel circuits
   7. Troubleshooting parallel circuits
6. Series-Parallel circuits
   1. Identifying series-parallel relationships
   2. Analysis of series-parallel circuits
   3. Voltage dividers with resistive loads
   4. Loading effect of meters
   5. The Wheatstone Bridge
   6. Superposition theorem
   7. Troubleshooting series-parallel circuits